Shop
Showing 1–20 of 60 results
Sale!
$139.95 $124.95
Add to cart
52321Bumper Grill Arm Assembly
Bracket Assembly used to attached grill to RV bumper or use with bumper grill table.
New 14-gauge black steel bumper grill arm assembly for use with grills that use a slot and bracket arms for grill support.
- Can convert the shade area around the coach to a cooking/party area
- Permits grilling in tight parking areas like tail-gaiting or stadium events
- Heavy duty "U" shaped brackets on a 4-inch bumper provide secure attachment to RV, locking pin to secure transport
- Grill can be moved up to 25 inches from coach to remove heat, grease, and mess away from your RV!
- Meets RVIA specifications
63432 Bumper Grill Table
- Universal Table Attachment for RVs
- Provides flat surface to place any tabletop gas grill with a footprint less than 17.5"W x 10"
- Made of black powder-coated 14 gauge steel
- Must be used with #52321 Bumper Grill Arm Assembly (sold separately)
- This table attachment will fit the WeberRQR 1200TM series tabletop grills.
- NOTE: This attachment must be removed from the Bumper Grill Arm Assembly before transit.
7000-3 Black brackets Complete
7000-3 Straight Bar w/ Black plastic brackets complete
Complete comes with the following
2 Black brackets
2 Black Gaskets
6 Black Screws
7000-4 White brackets Complete
7000-4 Straight Bar w/ White plastic brackets complete
Complete comes with the following
2 White Brackets
2 White Gaskets
6 White Screws
Sale!
$45.38 $29.95
Add to cart
85654LP Hose Conversion Kit
- For converting RVAD400, RVAD650 and RV500 grills
- Includes 72" LP hose for use on ground, table or deck. Includes tank connector, regulator and quick connect.
- Take grill anywhere for extended use. Ideal for tailgating, backyard BBQ and more!
- C.S.A. Approved Components
ACRYL1020CL Splash Guard Kit
Includes all parts below:
| 1020 CL Temp | Tempered glass with gimp | 1/8" 10" x 20" |
| Extr 10 | Aluminum extrusion | 1/4" X 10" |
| Extr 20 | Aluminum extrusion | 1/4" x 20" |
ACRYL1023CL Splash Guard Kit
Includes all parts below:
| 1023 CL Temp | Tempered glass with gimp | 1/8" 10" x 20" |
| Extr 10 | Aluminum extrusion | 1/4" X 10" |
| Extr 20 | Aluminum extrusion | 1/4" x 23" |
Battery Tray Strap Replacement
Replacement Battery Tray Strap
- 1 Inch wide 36 inches long with metal buckle
Battery Tray Strap Replacement Ratchet Style
Replacement Battery Tray Strap Upgrade
- 1 Inch wide 38 inches long from hook to hook with metal ratchet handle
Brite Bar Illuminated Handle
Illuminated RV Handle in 3 Designs: Straight, Curved or Spiral
- Provides solid gripping support day or night
- Made of clear, acrylic plastic
- 3 LED lights producing 1.2 watts; White LED light standard, custom colors available for $1 upcharge
- Comes with 12V wiring pigtail
- Includes chrome plated top and bottom mounting brackets and screws
- Add Custom Engraving for $5 (up to 16 characters). Note: Please include Custom Engraving text in the Order Notes section during checkout.
- All handle orders may take up to 2 weeks to ship
BRITE BAR REPLACEMENT (HANDLE ONLY) E-5500-D
PLAIN BAR ONLY REPLACEMENT FOR 5500 CURVED ASSIST HANDLE
This handle will only work with the die cast metal brackets because of the way it is notched. The notch (bevel) is on the front side of the handle.
Any questions on if this will fit your type please email pictures of your handle and or brackets.
Thanks.
BRITE BAR REPLACEMENT (HANDLE ONLY) E-5500D-E CUSTOM ENGRAVED
CUSTOM ENGRAVED BAR ONLY REPLACEMENT FOR 5500 CURVED ASSIST HANDLE
PLEASE ENTER WHAT YOU WOULD LIKE ENGRAVED IN THE NOTES AREA ON ORDER ALSO COLOR OF LETTERING
BLACK, RED, GREEN, BLUE
*HANDLE ORDERS MAY TAKE UP TO 2 WEEKS TO PROCESS*
BT-0712100-BKEZ Glide Single Battery Tray13.275″ x 8.325″
Holds one 12 volt battery. Provides easy access for periodic maintenance and service without disconnecting. Positive locking latches and easy fasten tie downs secure battery while in transit.
- Outside dimensions: 15"L x 8 1/8"W x 2 3/4"H
- Inside dimensions: 13.125"L x 6.875"W x 2.5"H
- Extends 29"
- Made of heavy 12 gauge, black powder-coated steel
- Includes frame
- Lubricated ball bearing glide system supports up to 100 lbs. in the full extension mode
- Clearance from mounting surface to bottom of sliding tray is .75"
BT-1314100-BKDouble Battery Tray15.75″x15.5″
RV Sliding Battery Tray
- Holds two 12 volt batteries
- Provides easy access for periodic maintenance and service without disconnecting
- Positive locking latches and easy fasten tie downs secure battery while in transit
- Outside dimensions: 15.75 wide X 15.5 deep
- Inside dimensions: 13 wide X 14 deep
- Extends 28″
- Made of heavy 12 gauge, black powder-coated steel
- Includes frame
- Lubricated ball bearing glide system supports up to 100 lbs. in the full extension mode
- Clearance from mounting surface to bottom of sliding tray is 1.25″
BT-1413100-BKEZ Glide 2-Battery Tray15.75″ x 15.5″
RV Sliding Battery Tray
- Holds two 12 volt batteries
- Provides easy access for periodic maintenance and service without disconnecting
- Positive locking latches and easy fasten tie downs secure battery while in transit
- Outside dimensions: 15.75"L x 15.5"W x 3.5"H
- Inside dimensions: 13.25"L x 14.125"W x 2.5"H
- Extends 28"
- Made of heavy 12 gauge, black powder-coated steel
- Includes frame
- Lubricated ball bearing glide system supports up to 100 lbs. in the full extension mode
- Clearance from mounting surface to bottom of sliding tray is 1.25"
BT-1413150-BKEZ Glide 2-Battery Tray15.75″ x 15.5″
RV Sliding Battery Tray
- Holds two 12 volt batteries
- Provides easy access for periodic maintenance and service without disconnecting
- Positive locking latches and easy fasten tie downs secure battery while in transit
- Outside dimensions: 15.75"L x 15.5"W x 3.5"H
- Inside dimensions: 13.25"L x 14.125"W x 2.5"H
- Extends 28"
- Made of heavy 12 gauge, black powder-coated steel
- Includes frame
- Lubricated ball bearing glide system supports up to 150 lbs. in the full extension mode
- Clearance from mounting surface to bottom of sliding tray is 1.25"
BT-1420300-BKEZ Glide 4-Battery Tray22.5″ x 16.125″
Holds four 6-volt batteries
Provides easy access for periodic maintenance and service without disconnecting
Positive locking latches and easy fasten tie downs secure battery while in transit
- Outside dimensions: 22.5"L x 16.125"W x 5.125"H
- Inside dimensions: 20.75"L x 14.25"W x 3.5"H
- Extends 41"
- Made of heavy 12 gauge, black powder-coated steel
- Includes frame
- Lubricated ball bearing glide system supports up to 300 lbs. in the full extension mode
- Clearance from mounting surface to bottom of sliding tray is 1.75"
BT-2014250-BKFour Battery Tray20.75″ x 14.25″
Inside Dimensions: 20.75" x 14.25"
Outside Dimensions: 23.25" x 16.75"
Clearance from mounting holes to bottom of tray is 1/2 inch
250 Pound slides