Shop
Showing 1–20 of 52 results
Sale!
$139.95 $124.95
Add to cart

52321Bumper Grill Arm Assembly
Bracket Assembly used to attached grill to RV bumper or use with bumper grill table.
New 14-gauge black steel bumper grill arm assembly for use with grills that use a slot and bracket arms for grill support.
- Can convert the shade area around the coach to a cooking/party area
- Permits grilling in tight parking areas like tail-gaiting or stadium events
- Heavy duty "U" shaped brackets on a 4-inch bumper provide secure attachment to RV, locking pin to secure transport
- Grill can be moved up to 25 inches from coach to remove heat, grease, and mess away from your RV!
- Meets RVIA specifications


63432 Bumper Grill Table
- Universal Table Attachment for RVs
- Provides flat surface to place any tabletop gas grill with a footprint less than 17.5"W x 10"
- Made of black powder-coated 14 gauge steel
- Must be used with #52321 Bumper Grill Arm Assembly (sold separately)
- This table attachment will fit the WeberRQR 1200TM series tabletop grills.
- NOTE: This attachment must be removed from the Bumper Grill Arm Assembly before transit.
Sale!
$45.38 $29.95
Add to cart

85654LP Hose Conversion Kit
- For converting RVAD400, RVAD650 and RV500 grills
- Includes 72" LP hose for use on ground, table or deck. Includes tank connector, regulator and quick connect.
- Take grill anywhere for extended use. Ideal for tailgating, backyard BBQ and more!
- C.S.A. Approved Components

ACRYL1020CL Splash Guard Kit
Includes all parts below:
1020 CL Temp | Tempered glass with gimp | 1/8" 10" x 20" |
Extr 10 | Aluminum extrusion | 1/4" X 10" |
Extr 20 | Aluminum extrusion | 1/4" x 20" |

ACRYL1023CL Splash Guard Kit
Includes all parts below:
1023 CL Temp | Tempered glass with gimp | 1/8" 10" x 20" |
Extr 10 | Aluminum extrusion | 1/4" X 10" |
Extr 20 | Aluminum extrusion | 1/4" x 23" |

Battery Tray Strap Replacement
Replacement Battery Tray Strap
- 1 Inch wide 36 inches long with metal buckle

Battery Tray Strap Replacement Ratchet Style
Replacement Battery Tray Strap Upgrade
- 1 Inch wide 38 inches long from hook to hook with metal ratchet handle

BT-0712100-BKEZ Glide Single Battery Tray13.275″ x 8.325″
Holds one 12 volt battery. Provides easy access for periodic maintenance and service without disconnecting. Positive locking latches and easy fasten tie downs secure battery while in transit.
- Outside dimensions: 15"L x 8 1/8"W x 2 3/4"H
- Inside dimensions: 13.125"L x 6.875"W x 2.5"H
- Extends 29"
- Made of heavy 12 gauge, black powder-coated steel
- Includes frame
- Lubricated ball bearing glide system supports up to 100 lbs. in the full extension mode
- Clearance from mounting surface to bottom of sliding tray is .75"

BT-1314100-BKDouble Battery Tray15.75″x15.5″
RV Sliding Battery Tray
- Holds two 12 volt batteries
- Provides easy access for periodic maintenance and service without disconnecting
- Positive locking latches and easy fasten tie downs secure battery while in transit
- Outside dimensions: 15.75 wide X 15.5 deep
- Inside dimensions: 13 wide X 14 deep
- Extends 28″
- Made of heavy 12 gauge, black powder-coated steel
- Includes frame
- Lubricated ball bearing glide system supports up to 100 lbs. in the full extension mode
- Clearance from mounting surface to bottom of sliding tray is 1.25″

BT-1413100-BKEZ Glide 2-Battery Tray15.75″ x 15.5″
RV Sliding Battery Tray
- Holds two 12 volt batteries
- Provides easy access for periodic maintenance and service without disconnecting
- Positive locking latches and easy fasten tie downs secure battery while in transit
- Outside dimensions: 15.75"L x 15.5"W x 3.5"H
- Inside dimensions: 13.25"L x 14.125"W x 2.5"H
- Extends 28"
- Made of heavy 12 gauge, black powder-coated steel
- Includes frame
- Lubricated ball bearing glide system supports up to 100 lbs. in the full extension mode
- Clearance from mounting surface to bottom of sliding tray is 1.25"

BT-1413150-BKEZ Glide 2-Battery Tray15.75″ x 15.5″
RV Sliding Battery Tray
- Holds two 12 volt batteries
- Provides easy access for periodic maintenance and service without disconnecting
- Positive locking latches and easy fasten tie downs secure battery while in transit
- Outside dimensions: 15.75"L x 15.5"W x 3.5"H
- Inside dimensions: 13.25"L x 14.125"W x 2.5"H
- Extends 28"
- Made of heavy 12 gauge, black powder-coated steel
- Includes frame
- Lubricated ball bearing glide system supports up to 150 lbs. in the full extension mode
- Clearance from mounting surface to bottom of sliding tray is 1.25"

BT-1420300-BKEZ Glide 4-Battery Tray22.5″ x 16.125″
Holds four 6-volt batteries
Provides easy access for periodic maintenance and service without disconnecting
Positive locking latches and easy fasten tie downs secure battery while in transit
- Outside dimensions: 22.5"L x 16.125"W x 5.125"H
- Inside dimensions: 20.75"L x 14.25"W x 3.5"H
- Extends 41"
- Made of heavy 12 gauge, black powder-coated steel
- Includes frame
- Lubricated ball bearing glide system supports up to 300 lbs. in the full extension mode
- Clearance from mounting surface to bottom of sliding tray is 1.75"

BT-2014300-BKFour Battery Tray20.75″ x 14.25″
Inside Dimensions: 20.75" x 14.25"
Outside Dimensions: 22.50" x 16.50"
Clearance from mounting holes to bottom of tray is 1/2 inch
300 Pound slides

Bumper Arm Griddle Table
Platform is 21″ wide 14″ deep Holes in platform align to hold Blackstone 17″ griddle (Griddle not included) Table is to be used with Fleming# 52321 (Bumper arm for 4 inch bumper Travel trailers) * not included Can also be used with … Continued