Additional information
| Weight | 18 lbs |
|---|
Back to Trays & Slides
PT-1216SW-SSEZ Glide Pan Tray 12″ x 15.5″
$180.00
Pan tray fits most RVs. Sliding metal tray with locking latch.
- Outside Dimensions: 12″L x 15.5″W x .75″H
- Inside Dimensions: 12.75″L x 17″W x .625″H
- Extends 9″
- Central roller bearing slide system
- Clearance from mounting surface to bottom of sliding tray is 1.25″
- Made of stainless steel
Related products
Dual Extension
Power Cargo Tray Varying Widths
- Drop-down front for easy loading and unloading
- Remote switching controls tray in either direction
- Comes fully assembled, no trim kits to purchase
- Tray extends out in both directions approx. 60 inches
- Carpeted panels and control switches not included
- Dimensions
| Product | Inside | Outside |
| PCT-2390-GY | 23" x 87.75" | 26" x 90" |
| PCT-3090-GY | 27" x 87.75" | 30" x 90" |
| PCT-2990-GY | 28.75" x 87.75" | 33" x 90" |
| PCT-3790-GY | 37" x 87.75" | 40" x 90" |
| PCT-4290-BK | 38.5" x 87.75" | 41.5" x 90" |
PT-2114SWR1-BK EZ Glide Pan Tray 21.5″ x 15″
Double Battery Tray in Black. Pan tray fits most RVs. Sliding metal tray with locking latch.
- Outside Dimensions: 21.5"L x 15"W x .75"H
- Inside Dimensions: 20.75"L x 13.75"W x .625"H
- Extends 9"
- Central roller bearing slide system
- Clearance from mounting surface to bottom of sliding tray is 1.25"
- Made of black powder-coated steel
BT-1314100-BKDouble Battery Tray15.75″x15.5″
RV Sliding Battery Tray
- Holds two 12 volt batteries
- Provides easy access for periodic maintenance and service without disconnecting
- Positive locking latches and easy fasten tie downs secure battery while in transit
- Outside dimensions: 15.75 wide X 15.5 deep
- Inside dimensions: 13 wide X 14 deep
- Extends 28″
- Made of heavy 12 gauge, black powder-coated steel
- Includes frame
- Lubricated ball bearing glide system supports up to 100 lbs. in the full extension mode
- Clearance from mounting surface to bottom of sliding tray is 1.25″
BT-1413100-BKEZ Glide 2-Battery Tray15.75″ x 15.5″
RV Sliding Battery Tray
- Holds two 12 volt batteries
- Provides easy access for periodic maintenance and service without disconnecting
- Positive locking latches and easy fasten tie downs secure battery while in transit
- Outside dimensions: 15.75"L x 15.5"W x 3.5"H
- Inside dimensions: 13.25"L x 14.125"W x 2.5"H
- Extends 28"
- Made of heavy 12 gauge, black powder-coated steel
- Includes frame
- Lubricated ball bearing glide system supports up to 100 lbs. in the full extension mode
- Clearance from mounting surface to bottom of sliding tray is 1.25"
Reviews
There are no reviews yet.